1 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com s6005_s01 ? 11/19/2013 benefts ? 16 C 80 v working voltage ? individually balanced cells ? ipC54 rated ? threaded, protected terminals ? operating temperature range of -40?c to +65?c ? optional voltage and over temperature signal ? cycle life > 500,000 cycles ? rohs compliant ? made in usa overview kemet s01 series supercapacitors are bank modules in which the cells are encased in a plastic holder. applications typical applications include wind turbine pitch control, starting systems, automotive subsystems, backup power/ups, ride through/power conditioning, and renewable energy systems. bank module supercapacitors s01 series, molded plastic cell module part number system s01 p m 5805 k 16 a uxxx series confguration code balancing &rqjudwlrq &rgh capacitor type capacitance code (f) capacitance tolerance rated voltage (vdc) termination code c-spec supercapacitor, bank module, molded plastic holder p = passive without clamping m = snap-in, multi-pin style digits 6,7 & 8 indicate the frst three digits of the capacitance value. digit 9 indicates the number of zeros to be added. k = 10% r = -0% 016 = 16 v 080 = 80 v a = the frst mechanical confguration of a particular part number blank = no monitor u808 = digital overvoltage and analog over temperature monitor u809 = digital overvoltage and digital over temperature monitor u810 = overvoltage and overtemperature monitor through can bus one world. one kemet
2 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com s6005_s01 ? 11/19/2013 dimensions C millimeters s01pm5805k016a s01pm1205r080a S01PM1205R080AU809 part number l w h nominal tolerance nominal tolerance nominal tolerance s01pm5805k016a 225.37 +/-1.0 50.8 +/-1.0 75.19 +/-1.0 s01pm1205r080a 238 +/-1.0 247 +/-1.0 74 +/-1.0 S01PM1205R080AU809 238 +/-1.0 247 +/-1.0 74 +/-1.0 bank module supercapacitors C s01 series, molded plastic cell module
3 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com s6005_s01 ? 11/19/2013 performance characteristics item performance characteristics rated voltage 16 C 81 vdc surge voltage 17 C 85 vdc isolation voltage/high potential 2,500 v capacitance range 12 C 58 f capacitance tolerance 10%, -0% temperature range -40c to +65c storage temperature range -40c to +70c temperature characteristics capacitance change: within 5% of initial specifed value internal resistance (esr): within 100% of initial specifed value life, dc 10 years, rated voltage, 25c c < 30% decrease, esr < 100% increase life, endurance 1,000 hours, rated voltage, 65c c < 30% decrease, esr < 100% increase life, shelf 1,000 hours, no voltage, 70c c < 20% decrease, esr < 100% increase life, cycle > 500,000 cycles, rated to half rated voltage, 25c c < 30% decrease, esr < 100% increase maximum number in series 40 (750 v) standards compliance rohs, ul810a approvals series / partnumber test type test standard date completed (or estimated) s01pm5805k016a vibration iec 60068-2-6 january 2011 mechanical shock iec 60068-2-27 underwriters laboratory ul810a march 2011 sae safety and abuse sae j2464 pending q1 2014 s01pm1205r080a S01PM1205R080AU809 s02at5006r016au809 s02at1656r048au809 pending pending q1 2014 bank module supercapacitors C s01 series, molded plastic cell module
4 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com s6005_s01 ? 11/19/2013 environmental compliance all kemet supercapacitors are rohs compliant. table 1 C ratings & part number reference part number s01pm5805k016a s01pm1205r080a 1 S01PM1205R080AU809 1 parameter capacitance (f) 58 11.6 11.6 capacitance tolerance 10% -0% -0% rated voltage (v) 16 81 81 surge voltage (v) 17 85 85 impedance [ac 1 khz] (m) 15 80 80 esr [dc] (m) 23 90 90 leakage current [72 h] (ma) <25 125 125 continuous current rating (a) 19 10 10 maximum peak current 1 s (a) 200 200 200 short circuit peak current (a) 1,000 700 700 cell management passive passive passive overvoltage & over temperature monitor no no yes energy/power maximum stored energy (wh) 2.1 10.6 10.6 energy density (wh/kg) 2.8 2.7 2.7 energy density (wh/l) 3.6 3.5 3.5 power density (kw/kg) 5.8 6.3 6.3 power density (kw/l) 7.4 2.3 2.3 maximum power (kw/kg) 1.8 3 3 physical confguration code pm pm pm l x w x h (mm) 225 x 51 x 76 238 x 247 x 74 238 x 247 x 74 weight (kg) 0.76 3 3 volume (ml) 594 3900 3900 1 preliminary (see prototype sample disclaimer) bank module supercapacitors C s01 series, molded plastic cell module
5 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com s6005_s01 ? 11/19/2013 mounting specifc users guide with mounting instructions ship with module. packaging quantities part number capacitance (f) rated voltage package type package quantity box weight box length box width box height s01pm5805k016a 58 16 box 1 2 lbs (0.9 kgs) 10.0" (254 mm) 6.0" (153 mm) 3.5" (89 mm) s01pm1205r080a 12 80 carton 1 7 lbs (3.2 kgs) 11.0" (279 mm) 8.5" (216 mm) 3.5" (89 mm) S01PM1205R080AU809 12 80 carton 1 7 lbs (3.2 kgs) 11.0" (279 mm) 8.5" (216 mm) 3.5" (89 mm) standard marking ? kemet logo ? rated voltage ? rated capacitance ? terminal markings bank module supercapacitors C s01 series, molded plastic cell module
6 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com s6005_s01 ? 11/19/2013 kemet corporation world headquarters 2835 kemet way simpsonville, sc 29681 mailing address: p.o. box 5928 greenville, sc 29606 www.kemet.com tel: 864-963-6300 fax: 864-963-6521 corporate off ces fort lauderdale, fl tel: 954-766-2800 north america southeast lake mary, fl tel: 407-855-8886 northeast wilmington, ma tel: 978-658-1663 central novi, mi tel: 248-994-1030 west milpitas, ca tel: 408-433-9950 mexico guadalajara, jalisco tel: 52-33-3123-2141 europe southern europe paris, france tel: 33-1-4646-1006 sasso marconi, italy tel: 39-051-939111 central europe landsberg, germany tel: 49-8191-3350800 kamen, germany tel: 49-2307-438110 northern europe bishop?s stortford, united kingdom tel: 44-1279-460122 espoo, finland tel: 358-9-5406-5000 asia northeast asia hong kong tel: 852-2305-1168 shenzhen, china tel: 86-755-2518-1306 beijing, china tel: 86-10-5829-1711 shanghai, china tel: 86-21-6447-0707 taipei, taiwan tel: 886-2-27528585 southeast asia singapore tel: 65-6586-1900 penang, malaysia tel: 60-4-6430200 bangalore, india tel: 91-806-53-76817 note: kemet reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. kemet does not assume any responsibility for infringement that might result from the use of kemet capacitors in potential circuit designs. kemet is a registered trademark of kemet electronics corporation. bank module supercapacitors C s01 series, molded plastic cell module
7 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com s6005_s01 ? 11/19/2013 other kemet resources tools resource location con? gure a part: capedge http://capacitoredge.kemet.com spice & fit software http://www.kemet.com/spice search our faqs: knowledgeedge http://www.kemet.com/keask electrolytic lifecalculator http://www.kemet.com:8080/elc product information resource location products http://www.kemet.com/products technical resources (including soldering techniques) http://www.kemet.com/technicalpapers rohs statement http://www.kemet.com/rohs quality documents http://www.kemet.com/qualitydocuments product request resource location sample request http://www.kemet.com/sample engineering kit request http://www.kemet.com/kits contact resource location website www.kemet.com contact us http://www.kemet.com/contact investor relations http://www.kemet.com/ir call us 1-877-mykemet twitter http://twitter.com/kemetcapacitors disclaimer all product speci? cations, statements, information and data (collectively, the information) in this datasheet are subject to change. the customer is responsible for checking and verifying the extent to which the information contained in this publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on kemet electronics corporations (kemet) knowledge of typical operating conditions for such applications, but are not intended to constitute C and kemet speci? cally disclaims C any warranty concerning suitability for a speci? c customer application or use. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by kemet with reference to the use of kemet?s products is given gratis, and kemet assumes no obligation or liability for the advice given or results obtained. although kemet designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all product?related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. bank module supercapacitors C s01 series, molded plastic cell module
8 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com s6005_s01 ? 11/19/2013 prototype sample disclaimer the customer acknowledges the following limitations of the prototype samples: (1) prototype samples are manufactured from preliminary designs and manufacturing processes, may not represent fnal designs, have not been released for commercial use and are not subject to the same quality control procedures applicable to released products; (2) prototype samples are not qualifed parts and are provided as-is by kemet electronics corporation, which specifcally disclaims any and all warranties and guarantees, explicit or implied, including without limitation the warranties of merchantability and ftness for a particular purpose or use; (3) prototype samples are not intended for commercial use, are provided for engineering evaluation only and are not recommended for use in the customers production line; and (4) the customer assumes the risk of any and all uses that the customer makes of the prototype samples. prototype copyright notice copyright kemet electronics corporation 2013, all rights reserved bank module supercapacitors C s01 series, molded plastic cell module
|
